2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat

Written by admin on November 19th, 2017
2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat



Do not heat sea water or salt water. This machine only have 220V, please confirm whether you can use the 220V before purchasing it! COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures. Automatic heating: Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Ultra-high temperature protection switch and reset button: Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). Input voltage: AC 220V Power: 2KW Current: 9A Phase1 Wire: 32.5mm² Frequency: 50/60Hz Pipe Dimeter: 1.5-inch in/1 inch out Size: 180 125 125mm Net Weight: 2.5 kg. But sometimes goes to 15-20 days for remote area. If your item develops a fault due to a manufacturing defect please get in contact with us. Your recognition will make us more confident to develop business and serve you better. Please give us the opportunity to resolve any problem and better service to you. The item “2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat” is in sale since Wednesday, February 08, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topbeauty-2008″ and is located in HK to worldwide. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • MPN: Does not apply
  • Brand: Unbranded
Be Sociable, Share!

Comments are closed.