220v

...now browsing by tag

 
 

2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat

Sunday, November 19th, 2017
2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat



Do not heat sea water or salt water. This machine only have 220V, please confirm whether you can use the 220V before purchasing it! COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures. Automatic heating: Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Ultra-high temperature protection switch and reset button: Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). Input voltage: AC 220V Power: 2KW Current: 9A Phase1 Wire: 32.5mm² Frequency: 50/60Hz Pipe Dimeter: 1.5-inch in/1 inch out Size: 180 125 125mm Net Weight: 2.5 kg. But sometimes goes to 15-20 days for remote area. If your item develops a fault due to a manufacturing defect please get in contact with us. Your recognition will make us more confident to develop business and serve you better. Please give us the opportunity to resolve any problem and better service to you. The item “2KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat” is in sale since Wednesday, February 08, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topbeauty-2008″ and is located in HK to worldwide. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • MPN: Does not apply
  • Brand: Unbranded

3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment

Wednesday, November 15th, 2017
3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment


Note:This item only support 220V. This thermostat is designed specifically for the hot tub, the thermostat is installed in the pipeline jacuzzi. When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 degrees Celsius, give your Jacuzzi to create a more comfortable environment. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature 3. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures 4. Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on 5. Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). Input voltage:220V 2. Current:13.6A 4. COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. 1 x 220V SPA Heater. We will be glad to answer your question at a timely fashion! The item “3KW 220V Swimming Pool and SPA Heater Electric Heating Thermostat Equipment” is in sale since Tuesday, May 23, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “cnc-mall” and is located in Bell, California. This item can be shipped to United States.

  • Brand: Coasts
  • MPN: Does Not Apply

5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat

Monday, November 6th, 2017
5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Specifications: Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 5.5KW Working environment: -10 50 , RH? 90% Control range: -45 80 Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 445 x 345 x 102mm/17.52 x 13.58 x 4.02inch Outer hole size: 42mm/1.65inch Inner hole size: 38mm/1.5inch Net Weight: 6.97kg Phases: single phase Before using the installation requirements: 1. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. Note: This single-phase appearance and three-phase look the same, the link is single-phase according to the wiring diagram can be used to connect. Package included: 1 x 5.5KW 220V Swimming Pool Electric Water Heater 1 x English manual. International buyers please note: a. The item “5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Heating Thermostat” is in sale since Friday, September 15, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “ellieshang” and is located in HK. This item can be shipped worldwide.

  • MPN: Does Not Apply
  • Brand: Unbranded/Generic

SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat

Sunday, November 5th, 2017
SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


You may also like. SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. 5.5KW 220V Swimming Pool & SPA Hot Tub Electric. Do not heat sea water or salt water. ST series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Manual reset temperature control switch. Once unexpected high temperature 60? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. U nique control system. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Input voltage: AC 220V. Pipe Dimeter: 1.5 inch. Size: 580 380 110mm. Net Weight: 7.5 kg. We now have warehouses in the United States and Germany. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. The item “SUPER 5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat” is in sale since Wednesday, June 07, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “top-mallshopping” and is located in Los Angeles. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Voltage: AC220V, 50Hz
  • Power: 5.5KW
  • Country/Region of Manufacture: China
  • UPC: 682698154496

11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP

Sunday, November 5th, 2017
11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP


You may also like. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP. 11KW 220V Swimming Pool & SPA Hot Tub Electric. Do not heat sea water or salt water. ST series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Manual reset temperature control switch. Once unexpected high temperature 60? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. U nique control system. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Input voltage: AC 220V. Pipe Dimeter: 1.5 inch. Size: 580 380 110mm. Net Weight: 7.5 kg. We now have warehouses in the United States and Germany. We offer 1-year guarantee. Please do check everything carefully when receiving the package. Failure to do so might result in damage to your own rights and interests. Our company is an emerging professional Cross-Border Electronic company. So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items. Any questions will be answered promptly, so please feel free to let me know your concern. The item “11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat TOP” is in sale since Wednesday, June 07, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “top-mallshopping” and is located in Los Angeles. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Voltage: AC220V, 50Hz
  • Power: 11KW
  • Country/Region of Manufacture: China
  • UPC: 682698154519

US NEW 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat

Sunday, October 29th, 2017
US NEW 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


US NEW 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


US NEW 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat Features: – Manual reset temperature control switch – Once unexpected high temperature 60â?? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Specifications: 220V 11KW: Input voltage: AC 220V Power: 11KW Current: 50A Phaseï¼? 1/3 Wire: 310mm² Frequency: 50/60Hz Pipe Dimeter: 1.5 inch Size: 580 380 110mm Net Weight: 7.5 kg Package included: – 1 Water heater – 2 Accessories – 1 English Manual. The item “US NEW 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat” is in sale since Wednesday, May 17, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “overseaoutlet” and is located in Walton, Kentucky. This item can be shipped to United States, Canada.

  • Brand: Unbranded
  • MPN: Does Not Apply

11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New

Saturday, October 28th, 2017
11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New


Sign up to Newsletters. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Water Heater Thermostat For Swimming Pool SPA Hot Tub New” is in sale since Friday, August 25, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “happykisssoul” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • Material: Stainless Steel
  • Brand: VEVOR bloqueurs
  • MPN: XCXZZ008
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3

11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath

Saturday, October 28th, 2017
11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


Sign up to Newsletters. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Here’s our fixed price listing. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath” is in sale since Tuesday, September 19, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “rumei-shopping” and is located in Ontario, California. This item can be shipped worldwide.

  • Material: Stainless Steel
  • Brand: Vevor Pettorine
  • MPN: UNBSU006
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3

220V Electric Water Heater Swimming Pool Thermostat SPA Hot Tub 15KW

Thursday, October 26th, 2017
220V Electric Water Heater Swimming Pool Thermostat SPA Hot Tub 15KW


220V Electric Water Heater Swimming Pool Thermostat SPA Hot Tub 15KW


15KW 220V Swimming Pool Electric Water Heater. Pool heater is special used for small pool less than. Massage pool and hot spring to heat and keep warm. Meanwhile can be assistant to heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it is improves greatly of trouble free in working time. Adaptability of water environment and stability. 8.5kg(18.7lb). Temperature adjustable: according to the required temperature. Automatic constant temperature, safe and reliable : when Water level is lower than the original value, the system will automatically shut off. Needs to be consistent with the voltage which marked on the machine. The sensor should keep a. Distance from the power line. Avoiding to contact or close. The sensors, the power lines and the output relay interface. 220V 15KW Swimming Pool Electric Water Heater. The item “220V Electric Water Heater Swimming Pool Thermostat SPA Hot Tub 15KW” is in sale since Wednesday, August 23, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “printingshop2014″ and is located in San Gabriel, California. This item can be shipped to United States.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Power Source: Electric
  • UPC: Does not apply

U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater

Wednesday, October 18th, 2017
U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. This Swimming pool heater is special used for small pool less than 3m³ (106 ft3) , massage pool and hot spring to heat and keep warm. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. AC220-240V(only for US). That means you should have electrician’s foundation, electronics electrocircuit as well as simple machine knowledge. If not, please call an electrician to install this device. On the basis of American’s actual voltage situation, the 240V ones would be safer than 220V(1 phase) ones for US customers. We will send 240V ones by default. Manual reset temperature control switch. Once unexpected high temperature. Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. If you need more time, please let us know. As your satisfaction is our utmost priority and goal, we will endeavor to resolve all of your problems until you are satisfied. We will help you solve all the problems as best as we can. All messages will be responded within 12 – 24 hours. Your recognition will make us more confident to develop business and serve you better. We are a company with rich experience in world trade. Founded in 2009, we are dedicated to serving our customers with great products and great service while keeping the quality high and the prices low. We also have rich products more than display in the store. The item “U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater” is in sale since Friday, June 30, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “fei833″ and is located in Nanjing. This item can be shipped to United States.

  • Brand: U.S.Solid
  • MPN: SPH00013
  • Power Source: Electric
  • Model: USS-SPH00013
  • Country/Region of Manufacture: China
  • UPC: 888107082194