bath

...now browsing by tag

 
 

Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat

Sunday, January 28th, 2018
Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Do not heat sea water or salt water. This machine only have 220V, please confirm whether you can use the 220V before purchasing it! COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures. Automatic heating: Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Ultra-high temperature protection switch and reset button: Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). Input voltage: AC 220V. Pipe Dimeter: 1.5-inch in/1 inch out. Size: 180 125 125mm. Net Weight: 2.5 kg. The item “Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat” is in sale since Saturday, August 13, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topbeauty-2008″ and is located in HK to worldwide. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

  • MPN: Does not apply
  • Brand: Unbranded

3 KW Water Heater for Swimming Pool & bath SPA for 220V ONLY

Friday, January 5th, 2018
3 KW Water Heater for Swimming Pool & bath SPA for 220V ONLY


3 KW Water Heater for Swimming Pool & bath SPA for 220V ONLY


3 KW Water Heater for Swimming Pool & bath. Do not heat sea water or salt water. This machine only have 220V, please confirm whether you can use the 220V before purchasing it! The temperature is adjustable. Size: 183 124 124 mm. Net Weight: 2.5 kg. These charges are the buyers responsibility. We will track the item all the time until it is reached to you. Return accepted in 30 days after the item reached to you. Return package must be in the original packaging, everything must be in new condition. A good feedback is very important. We will work with you to solve any problems. If you have a question or concern before or after receiving your item, please do not hesitate to contact our customer service team by clicking on the “Ask a question” link in the bottom left. Your satisfaction is guaranteed. The item “3 KW Water Heater for Swimming Pool & bath SPA for 220V ONLY” is in sale since Wednesday, December 16, 2015. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topmalls” and is located in Shenzhen. This item can be shipped worldwide.

  • Brand: unbranded
  • MPN: Does Not Apply

220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube

Thursday, December 14th, 2017
220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube


220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube


220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube


220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube


220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube


220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube



Mobile Phones & Communication. Clothing, Shoes & Accessories. Video Games Bag & Case. You may also like. 220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube. 183 x 124 x 124 MM / 7.24.94.9Inch. 2.5KG / 5.5lb. This product has only. Type on sale, can’t directly use in 110V power. Series Thermostat Is Designed Massage Bathtub Design, The Thermostat Is Installed In The. Pipeline At The Bottom Of The Bathtub, The Bathtub When The Hot Water Is Added After The Start. Of The Pump, Automatic Thermostat Heating, The Temperature Of The Water In The Bathtub Keep. To Create a Comfortable Environment For Your Massage Bathtub. This product is small, easy to install at the bottom of the bathtub in the circular massage pipe. This product is easy to operate, provides a mechanical temperature control switch, you can set the. Temperature according to the use of temperature. This product is safe and reliable when running, with water switch, ultra high temperature protection switch. All the mechanical controller is adopted to be economical and durable. Heating thermostat liner material for 316# stainless steel and electric heating tube, good corrosion resistance (chlorine corrosion), durable. It has good circulation, no slag, convenient disassembly. When the water flow rate higher than 20gal/min and the water pressure higher than 3psi. The heater will start to work automatically. If less than this level, it will stop working automatically! Normally, you should receive item within 2-4 weeks. We are a professional trading company specializing in video games, car accessories, spy equipments and other electronic products. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. If YOU are not satisfied, please let us know so we can make it right. In case of DOA, Please notice us within 3 days and return the case within 7 days after receiving the items. (The date on Post Mark is for standard). Notice: This product has only 220V type on sale, cant directly use in 110V power The M Series Thermostat Is Designed Massage Bathtub Design, The Thermostat Is Installed In The Pipeline At The Bottom Of The Bathtub, The Bathtub When The Hot Water Is Added After The Start Of The Pump, Automatic Thermostat Heating, The Temperature Of The Water In The Bathtub Keep Adjustable At 30-40, To Create a Comfortable Environment For Your Massage Bathtub. Note: When the water flow rate higher than 20gal/min and the water pressure higher than 3psi, the heater will start to work automatically. The item “220V 3KW Water Heater Thermostat For Swimming Pool Spa Bath Bathtube” is in sale since Thursday, May 11, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “zhaoyue6688″ and is located in Shenzhen. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Power Source: Electric
  • Country/Region of Manufacture: China
  • Power: 3KW
  • Voltage: AC220V
  • Dimension: 183 x 124 x 124 MM / 7.2*4.9*4.9Inch
  • Current(A): 14
  • Phase(N-): 1
  • Pipe diameter(inch): 1
  • Net Weight: 2.5KG / 5.5lb

11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath

Saturday, October 28th, 2017
11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath


Sign up to Newsletters. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Here’s our fixed price listing. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Swimming Pool Water Heater Thermostat Comfortable Safe Bath” is in sale since Tuesday, September 19, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “rumei-shopping” and is located in Ontario, California. This item can be shipped worldwide.

  • Material: Stainless Steel
  • Brand: Vevor Pettorine
  • MPN: UNBSU006
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3

CE 11 KW Water Heater for Swimming Pool & bath tube E

Saturday, October 21st, 2017
CE 11 KW Water Heater for Swimming Pool & bath tube E


11 KW Water Heater for Swimming Pool & bath tube. Pipe Diameter(inch)1.5. Wire(m,)310 /54. Usually 2kw power can heat 1 cubic meter (1)water. This 11kw water heater can be used in a pool with 5-5.5 water. This product has a digital TEMP display and high quality heating element which can be anti-scale and. Sensitive flow switch, mute contactors, time-lapse starting. Electricity over current protection and over-Temp safety are applied. Its widely used in circulation. Systems of hot baths, Jacuzzis and swimming pools for TEMP maintain. On the basis of manufacturing and developing the heater for many years, we invent the new heater. It adopted TEMP sensor to replace the traditional mechanical and electrical-flow switch. The sensor precisely monitors the temperature change of the whole system, and cooperates. With the control unit to guarantee a proper working environment for the heating elements and the. Correct customer setting temperature. No mechanical switch is used, thus avoiding any problem caused by mechanical faults. Avoiding any particulate conglomerating on sensors. Dramatically reduce the number of unnecessary circulation cycles, which extends the life of. Circulating pump and use less energy. Fast reaction for all possible events and displaying working status on the control panel. For customer to check the working status of the system, so avoid the possibility of heating. Without enough water and burning the system. Stop the system immediately if any fault occurs and display related hint message. Easier for customer to test and solve the fault according to the hint messages, thus give. The highest safety protection for customers. There are no exceptions! Or, you may choose to have a replacement. Feedback is very important to us. Your satisfaction is very important for us. If you have any problems, we are very glad to help you. The item “CE 11 KW Water Heater for Swimming Pool & bath tube E” is in sale since Tuesday, June 28, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “guanpingzhu” and is located in HONG KONG. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply

U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater

Wednesday, October 18th, 2017
U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. This Swimming pool heater is special used for small pool less than 3m³ (106 ft3) , massage pool and hot spring to heat and keep warm. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. AC220-240V(only for US). That means you should have electrician’s foundation, electronics electrocircuit as well as simple machine knowledge. If not, please call an electrician to install this device. On the basis of American’s actual voltage situation, the 240V ones would be safer than 220V(1 phase) ones for US customers. We will send 240V ones by default. Manual reset temperature control switch. Once unexpected high temperature. Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. If you need more time, please let us know. As your satisfaction is our utmost priority and goal, we will endeavor to resolve all of your problems until you are satisfied. We will help you solve all the problems as best as we can. All messages will be responded within 12 – 24 hours. Your recognition will make us more confident to develop business and serve you better. We are a company with rich experience in world trade. Founded in 2009, we are dedicated to serving our customers with great products and great service while keeping the quality high and the prices low. We also have rich products more than display in the store. The item “U. S. Solid 5.5KW 220V Electric Swimming Pool Home Bath SPA Hot Tub Water Heater” is in sale since Friday, June 30, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “fei833″ and is located in Nanjing. This item can be shipped to United States.

  • Brand: U.S.Solid
  • MPN: SPH00013
  • Power Source: Electric
  • Model: USS-SPH00013
  • Country/Region of Manufacture: China
  • UPC: 888107082194

220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater

Sunday, September 24th, 2017
220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater


220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater


220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater


220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater


This item only support 220V 2. When you make order of pool heater(spa heater), please leave massage about the pipe connection diameter you need:48mm or 50mm? Or we will send 48mm. Model:ST-15 Storage / Tankless: Storage 5000W”> Power (W): 5000W”>>5000W Voltage (V): 220V Capacity: 4 People Type: Sauna Rooms Function: Wet Steam Feature: Computer Control Panel Power: 15kw Herze: 50-60hz Description New 15KW 220V Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater ST series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Manual reset temperature control switch Once unexpected high temperature 60C occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater B. Unique control system We are professionals in producing and developing heaters for over 10 years. ST and PHS are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature C. Sensor technique are : 1. A, The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. B, No mechanical sensors, avoid any mechanical failure to affect the function of the heater. C, Avoid affection of ion accumulation to mechanical sensors. D, Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. Intelligent self-diagnose function The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. This purchasing price does not included any Tariff. The item “220V 15KW Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater” is in sale since Monday, December 19, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “cjc-fashion” and is located in Shenzhen. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Power Source: Electric

15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V

Saturday, September 23rd, 2017
15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V


15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V


15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V


15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V


15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V


15KW Hot Tub Electric Water Heater for Swimming Pool & Home Bath SPA 380V. ST series pool heaters are special used for small pool less than 7m³(247.2ft3) , massage pool and hot spring to heat and keep warm. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Volt: AC 380 V (3 phase). Pipe Dimeter: 1.5 inch. Net Weight: 7.5 kg. Package Size: 120560390 mm. More details, please refer to the. More Options and Compare. Manual reset temperature control switch. Once unexpected high temperature. Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Buyers will be responsible for custom clearance and potential tariff. The amount of tariff is composed of two parts. If you need more time, please let us know. As your satisfaction is our utmost priority and goal, we will endeavor to resolve all of your problems until you are satisfied. We will help you solve all the problems as best as we can. All messages will be responded. Within 12 – 24 hours. From Sunday to Friday. Your recognition will make us more confident to develop business and serve you better. All our customers are very important to us. We are a company with rich experience in world trade. Founded in 2009, we are dedicated to serving our customers with great products and great service while keeping the quality high and the prices low. We also have rich products more than display in the store. The item “15KW Electric Hot Tub Water Heater for Swimming Pool & Home Bath SPA 380V” is in sale since Friday, June 17, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “zhuofei3371″ and is located in Nevada. This item can be shipped worldwide.

  • Brand: Generic
  • Power Source: Electric
  • MPN: SPH00007
  • Country/Region of Manufacture: China
  • Model: ST-15-380V
  • Material: stainless steel

U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater

Friday, September 22nd, 2017
U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater


U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater


U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater


U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater


U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater



15KW Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. This Swimming pool heater is special used for small pool less than 5m³ (176.6 ft3) , massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. AC 220/380V(240V only for US). That means you should have electrician’s foundation, electronics electrocircuit as well as simple machine knowledge. If not, please call an electrician to install this device. We provide 220V/1 phase and 240V/2phase. On the basis of American’s actual voltage situation, the 240V ones would be safer than 220V ones for US customers. If US customers choose “220-240V”. We will send 240V ones by default. Manual reset temperature control switch. Once unexpected high temperature. Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Buyers will be responsible for custom clearance and potential tariff. The amount of tariff is composed of two parts. If you need more time, please let us know. As your satisfaction is our utmost priority and goal, we will endeavor to resolve all of your problems until you are satisfied. We will help you solve all the problems as best as we can. All messages will be responded within 12 – 24 hours. Your recognition will make us more confident to develop business and serve you better. We are a company with rich experience in world trade. Founded in 2009, we are dedicated to serving our customers with great products and great service while keeping the quality high and the prices low. We also have rich products more than display in the store. The item “U. S. Solid 15KW Swimming Pool & Home Bath SPA Hot Tub Electric Water Heater” is in sale since Thursday, February 09, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “nikolastm” and is located in Nanjing. This item can be shipped worldwide.

  • Brand: U.S.Solid
  • MPN: SPH00014
  • Power Source: Electric
  • Model: USS-SPH00014
  • Country/Region of Manufacture: China

48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung

Friday, September 1st, 2017
48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung


48mm Poolheizung Wärmetauscher Poolheizer Thermostat Spa Bath Schwimmbadheizung



220V 3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat New. Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40 adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40 (104). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8 (11 to 14) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically. It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button. In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49(120) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately. In order to reset, let the water cool down to approximately 38 (100), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running. Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat. Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. When using electrical products basic precautions should always be followed, including the following. All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection. The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz. The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe. Size: 340 122 125mm. Phase Parameters: Single Phase. Suitable For: Swimming Pool Equipment. Company Name:Shanghai Xianghuan Eisenwaren GmbH. Company representative: Shengli Xu. Address:Zimmer 1212., Nr. 13., Gasse 65., Huandongyilu Straße, Fengjing Gemeinde, Jinshan Bezirke, Shanghai, China. Trade registration number:91310116563077183Y. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time). In the same day. These charges are the buyers responsibility. Widerrufsrecht Sie haben das Recht, binnen eines Monats ohne Angabe von Gründen diesen Vertrag zu widerrufen. Die Widerrufsfrist beträgt einen Monat ab dem Tag, an dem Sie oder ein von Ihnen benannter Dritter, der nicht der Beförderer ist, die Waren in Besitz genommen haben bzw. Um Ihr Widerrufsrecht auszuüben, müssen Sie uns [Unternehmen: Shanghai Xianghuan Eisenwaren GmbH], Adresse: Zimmer 1212., Nr. Sie können dafür das beigefügte Muster-Widerrufsformular verwenden, das jedoch nicht vorgeschrieben ist. Zur Wahrung der Widerrufsfrist reicht es aus, dass Sie die Mitteilung über die Ausübung des Widerrufsrechts vor Ablauf der Widerrufsfrist absenden. Folgen des Widerrufs Wenn Sie diesen Vertrag widerrufen, haben wir Ihnen alle Zahlungen, die wir von Ihnen erhalten haben, einschließlich der Lieferkosten (mit Ausnahme der zusätzlichen Kosten, die sich daraus ergeben, dass Sie eine andere Art der Lieferung als die von uns angebotene, günstigste Standardlieferung gewählt haben), unverzüglich und spätestens binnen vierzehn Tagen ab dem Tag zurückzuzahlen, an dem die Mitteilung über Ihren Widerruf dieses Vertrags bei uns eingegangen ist. Für diese Rückzahlung verwenden wir dasselbe Zahlungsmittel, das Sie bei der ursprünglichen Transaktion eingesetzt haben, es sei denn, mit Ihnen wurde ausdrücklich etwas anderes vereinbart; in keinem Fall werden Ihnen wegen dieser Rückzahlung Entgelte berechnet. Wir können die Rückzahlung verweigern, bis wir die Waren wieder zurückerhalten haben oder bis Sie den Nachweis erbracht haben, dass Sie die Waren zurückgesandt haben, je nachdem, welches der frühere Zeitpunkt ist. Sie haben die Waren unverzüglich und in jedem Fall spätestens binnen vierzehn Tagen ab dem Tag, an dem Sie uns über den Widerruf dieses Vertrags unterrichten, an uns oder an [hier sind gegebenenfalls der Name und die Anschrift der von Ihnen zur Entgegennahme der Waren ermächtigten Person einzufügen] zurückzusenden oder zu übergeben. Die Frist ist gewahrt, wenn Sie die Waren vor Ablauf der Frist von vierzehn Tagen absenden. Sie tragen die unmittelbaren Kosten der Rücksendung der Waren. Sie müssen für einen etwaigen Wertverlust der Waren nur aufkommen, wenn dieser Wertverlust auf einen zur Prüfung der Beschaffenheit, Eigenschaften und Funktionsweise der Waren nicht notwendigen Umgang mit ihnen zurückzuführen ist. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Bremen, DE. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “48MM POOLHEIZUNG WÄRMETAUSCHER POOLHEIZER THERMOSTAT SPA BATH SCHWIMMBADHEIZUNG” is in sale since Thursday, November 24, 2016. This item is in the category “Heimwerker\Sauna & Schwimmbecken\Schwimmbeckenbedarf\Schwimmbeckenheizung”. The seller is “bestoffertoyou” and is located in Bremen. This item can be shipped to all countries in Europe, United States, Australia.

  • Herstellungsland und -region: China
  • Marke: Vevor Interpol
  • Herstellernummer: ZCXZG009
  • Anzahl der Einheiten: 1
  • Maßeinheit: Unit
  • Stromquelle: Elektrizitat
  • Schwimmbad-Typ: Alle
  • Condition: New
  • Draht: 3 * 4 Quadratmillimeter
  • Size: 340 * 122 * 125mm
  • Bundle Listing: 1 x Wasser Heizung Thermostat,2 x Schnittstelle,1 x Manuell
  • Aktuell: 14A
  • Pipe Dimeter: 2.54cm/1inch
  • Nettogewicht: 2kg/4.4lbs
  • Paket: 1 x Wasser Heizung Thermostat,2 x Schnittstelle,1 x Manuell
  • Spannung: 220V / 50Hz
  • Phasenparameter: Einphasig
  • Leistung: 3KW
  • Suit for: Schwimmbadausrustung