electric

...now browsing by tag

 
 

11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable

Sunday, February 18th, 2018
11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable



Sign up to Newsletters. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Secure Stable” is in sale since Monday, December 25, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “popularitemstore” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • Material: Stainless Steel
  • Brand: Vevor Tractor
  • MPN: 874AZ002
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3

11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA

Wednesday, February 14th, 2018
11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat. 11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat Features: – Manual reset temperature control switch – Once unexpected high temperature 60â?? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the? Button to restart the heater. Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Specifications: 220V 11KW: Input voltage: AC 220V Power: 11KW Current: 50A Phaseï¼? 1/3 Wire: 310mm² Frequency: 50/60Hz Pipe Dimeter: 1.5 inch Size: 580 380 110mm Net Weight: 7.5 kg Package included: – 1 Water heater – 2 Accessories – 1 English Manual. The item “11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat In USA” is in sale since Monday, November 13, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “xiaofega0″ and is located in Rowland Heights, California. This item can be shipped to United States.

  • Brand: Unbranded
  • MPN: Does Not Apply

Raypak PR156AEN 156K BTU Natural Gas Electric Swimming Pool & Spa Tub Heater

Thursday, February 8th, 2018
Raypak PR156AEN 156K BTU Natural Gas Electric Swimming Pool & Spa Tub Heater



Product ships from Illinois. The item “Raypak PR156AEN 156K BTU Natural Gas Electric Swimming Pool & Spa Tub Heater” is in sale since Tuesday, January 23, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “rjavore72″ and is located in Lisle, Illinois. This item can be shipped to United States.

  • Brand: Rheem
  • MPN: PR156AEN
  • Model: Raypak Pool & Spa Heater
  • Application: For Above Ground Pools & Spas
  • BTU: 156,000
  • Elevation: 0-2000 FT
  • Fuel Consumption Type: Natural Gas
  • Power Source: Natural Gas

11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift

Wednesday, January 31st, 2018
11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Specifications: Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 11 KW Working environment: -10 50 , RH? 90% Control range: -45 80 Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 445 x 345 x 102mm/17.52 x 13.58 x 4.02inch Outer hole size: 42mm/1.65inch Inner hole size: 38mm/1.5inch Net Weight: 7.36kg Before using the installation requirements: 1. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. Package included: 1 x 11KW 220V Swimming Pool Electric Water Heater. International buyers please note: a. The item “11KW 220V Electric Water Heater Thermostat Home Swimming Pool SPA Hot Tub Gift” is in sale since Friday, December 15, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “biwecity” and is located in Altadena, California. This item can be shipped to United States, Canada.

  • Brand: Meco
  • MPN: lHC435332
  • Model: 435332
  • Manufacturer Part Number: lHC435332

Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat

Sunday, January 28th, 2018
Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Do not heat sea water or salt water. This machine only have 220V, please confirm whether you can use the 220V before purchasing it! COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, By using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C 2. COASTS thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 8 °C / h elevated temperatures. Automatic heating: Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Ultra-high temperature protection switch and reset button: Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). Input voltage: AC 220V. Pipe Dimeter: 1.5-inch in/1 inch out. Size: 180 125 125mm. Net Weight: 2.5 kg. The item “Coasts 3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat” is in sale since Saturday, August 13, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topbeauty-2008″ and is located in HK to worldwide. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

  • MPN: Does not apply
  • Brand: Unbranded

11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa

Monday, January 22nd, 2018
11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Electric Swimming Pool Water Heater Thermostat Hot Tub Jacuzzi Spa” is in sale since Thursday, October 19, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “technology-zoom” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • Material: Stainless Steel
  • Brand: Vevor Manguitos
  • MPN: FGFDG007
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3

5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST

Sunday, January 21st, 2018
5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST


5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat Features: – Manual reset temperature control switch – Once unexpected high temperature 60â?? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Unique control system: ST series are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Specifications: 220V 5.5KW: Input voltage: AC 220V Power: 5.5KW Current: 25A Phaseï¼? 1/3 Wire: 36mm² Frequency: 50/60Hz Pipe Dimeter: 1.5 inch Size: 580 380 110mm Net Weight: 7.5 kg Package included: – 1 Water heater – 2 Accessories – 1 English Manual. The item “5.5KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat US FAST” is in sale since Wednesday, January 03, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “trustinchina” and is located in Dayton, New Jersey. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does Not Apply

Hayward 11kw Comfortzone Electric Spa Hot Tub Heater 240v

Saturday, January 20th, 2018
Hayward 11kw Comfortzone Electric Spa Hot Tub Heater 240v


Hayward Comfortzone 11kw Spa Heater. Hayward electric spa heaters contain all of the sophisticated features and capabilities of heaters twice their size. The electric heaters fit into compact spaces -even under spa skirts or steps. Like all Hayward heaters, they are easy to install and service. Perfect for Hot Tubs and spas Spas above 70 G. An external by pass is recommended. 304 stainless steel tank. 304 stainless steel threaded head, safety sensor electric heating element. Service-ease design gives simple access to internal controls. Heater on indicator light. We are unable to make changes or cancellations to orders after they are placed. We do not offer local pickups. Box & APO/FPO Addresses. Oversized deliveries are curbside only with FREE Lift Gate Service. If the combined weight of your order is 500 lbs. TO RETURN MERCHANDISE PLEASE FOLLOW THESE INSTRUCTIONS. Any item(s) received after 30 days will be denied and sent back to the customer at their expense. Not all items may be returnable. For example: Chemicals, Custom/Special Orders, Unfolded Covers, Opened Aboveground Liners, Drilled Solar Reels and Custom Commercial Furniture are all non-returnable. Deliveries should be inspected and any visible damage should be notated prior to accepting the package. All damage claims must be submitted within 7 days of receipt by the customer, or a claim cannot be submitted. Insure the package for its full value. West Chicago, IL 60185. The item “Hayward 11kw Comfortzone Electric Spa Hot Tub Heater 240v” is in sale since Tuesday, November 28, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “saveonpoolsupplies” and is located in United States. This item can be shipped to United States.

  • Brand: Hayward
  • MPN: CSPAXI11
  • Power Source: POWERSOURCE

Hayward ComfortZone Electric 11 KW Heater For Spa Hot Tub CSPAXI11

Friday, January 19th, 2018
Hayward ComfortZone Electric 11 KW Heater For Spa Hot Tub CSPAXI11


Hayward ComfortZone Electric 11 KW Heater For Spa Hot Tub CSPAXI11. Spas & Hot Tubs. Hayward ComfortZone Electric 11 KW Spa Heater. Hayward ComfortZone Electric Spa Heaters feature the same quality components and capabilities of spa heaters twice their size – for performance you can count on. Hayward ComfortZone Electric Spa & Hot Tub Heaters are designed to fit into compact spaces such as beneath spa skirts and steps, and like every heater that carries the Hayward name, they are dependable, and easy to install & service. This listing is for a 11 KW Electric Spa Heater. Perfect for Hot Tubs & Spas External bypass recommended for spas that operate above 70 G. Hayward dependability, at a great price! 304 stainless steel tank. 1¾ wide vertical supports. 304 stainless steel threaded head, safety sensor electric heating element. Service-ease design gives simple access to internal controls. Heater on indicator light. 1.5 Pipe size. Customers who have shopped with us before can tell you. Specialty Pool Products. Offers the finest, most innovative and most effective items for your pool, spa, backyard and home. We only sell products that meet our strict standards for quality, function and value. And there’s more… Specialty Pool Products also promises you. We are unable to make changes or cancellations to orders after they are placed. Oversized deliveries are curbside only with FREE Lift Gate Service. If the combined weight of your order is 500 lbs. At SPP, your satisfaction is always our primary concern. During peak times our response may be delayed as we do receive hundreds of emails daily. We hold ourselves to the highest standards and value the trust you place in us. We pledge not to share this information with other organizations for commercial purposes. Specialty Pool Products does not rent or sell its customer list. The item “Hayward ComfortZone Electric 11 KW Heater For Spa Hot Tub CSPAXI11″ is in sale since Friday, December 15, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “specialtypoolproducts” and is located in United States. This item can be shipped to United States.

  • Brand: Hayward
  • MPN: CSPAXI11

11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat

Thursday, January 18th, 2018
11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat


11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater DigitalThermostat. Series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller, temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Read through the manual carefully to know better about the heaters installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60140occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the Reset button to restart the heater. Control system automatically heat-up procedure. Once reconnected to power or if the water temperature is 1 below the user setting temperature at least 10 minutes after entering the waiting stage, the heater enters the preparation stage. If hint message does not appear on the panel within 2 minutes, and the water temperature is 1 below the user setting temperature after 2 minutes, the heater enters next stage pre-heat stage. In this stage, heater heats up for 10 seconds and waits for 90 seconds. Heating indicator lights for 10 seconds. If hint message does not appear on the panel and the water temperature is 1 below the user setting temperature, heater enters next stage heat-up stage. In this stage, all heating elements turn on, and heating indicator turns on as well. If hint message does not appear, heater will heat up to 1 above the user setting temperature, then heating indicator blinks for 2 minutes. After that, circulation pump turns off for models with circulation pump control. Heater enters next stage waiting stage. Waiting stage lasts for at least 10 minutes. 10 minutes later, if the water temperature is 1 below the user setting temperature, the heater jumps to preparation stage, otherwise, it remains in the waiting stage. The automatically heat-up process is non-stopping and will continue to circulating through all stages until the control system or heater is power off. You could ask for models with separated circulation pump control function. Increase the user setting temperature by 1 or 2. Decrease the user setting temperature by 1 or 2. Switch between temperature unitPress button for more than 3 secondspanel displays and in turns. Release the button once the unit you wish to choose appears, 5 seconds later, panel restore to display the current water temperature. Switch between temperature sensorsPress button, the panel will blink and display temperature measured by temperature sensor 2. After 5 seconds or press thebutton again, panel will restore to display current water temperature which is measured by temperature sensor 1. Temperature display and setting. Temperature display range 653 or 43127. Temperature setting range 2250 or 72122factory default temperature is 42. Press or button to increase or decrease the setting temperature by 1(2)and the panel blinks and display the setting temperature. 5 seconds later, the panel stops blinking, confirm the setting change and restore the current temperature display. If reconnected to power, the user setting temperature is set to default temperature 42. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. No mechanical sensors, avoid any mechanical failure to affect the function of the heater. Avoid affection of ion accumulation to mechanical sensors. Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. Manual reset temperature control switch: Once unexpected high temperature 60 occurs, the temperature switch cuts off the system. Unique control system: ST series are the newest generation with our unique control system. Sensor technique are: A. The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations; B. No mechanical sensors, avoid any mechanical failure to affect the function of the heater; C. Avoid affection of ion accumulation to mechanical sensors; D. Intelligent self-diagnose function: The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. Housing material: Aluminum-coated plate. Net Weight: 7.5 kg/16.5lbs. Package Size: 120560380 mm/4.72214.9. 1 x Pool Heater. Sign up to newsletter. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “11KW 220V Swimming Pool & SPA Hot Tub Electric Water Heater Thermostat” is in sale since Monday, October 30, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “frontiertosale” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Canada, Australia.

  • Material: Stainless Steel
  • Brand: VEVOR
  • MPN: GC5430040
  • Model: ST-11-220V
  • Country/Region of Manufacture: China
  • Power Source: Electric
  • Housing material: Aluminum-coated plate
  • Power: 11 KW
  • Current: 50A
  • Volt: AC 220-240V
  • Pipe Diameter: 2inch/5.08cm
  • Wire: 3*10 Square millimeter
  • Net Weight: 7.5 kg/16.5lbs
  • Package Size: 120*560*380mm/4.7*22*14.9inch
  • Capacity: Less than 5CBM
  • Phase: 1/3